PAT
Aluminium Tube
PAT aluminium tubes in eight catalog-confirmed diameter and length configurations.
EOAT & Factory Automation ComponentsSelection · Sourcing · RFQ Support
Product Category
EOAT Mounting Components
Mounting, joint, profile, tube and structural components for modular end-of-arm tooling assemblies.
31 Series pages currently available
PCT
Carbon Fiber Tube
PCT carbon fiber tubes in twelve catalog-confirmed diameter and length configurations.
PEP / EP
Extruded Aluminum Profiles
Extruded aluminum profiles for configurable EOAT frames, with multiple cross-sections, standard lengths, weights and matching end-cap references.
PST
Sus Tube
PST stainless steel tubes for EOAT frames, available in three source-verified diameters with a standard 1500 mm length.
PTC / PTS / PTD
Profile Screws and Shims
Stainless profile screws plus single-hole and double-hole shims for EOAT profile assemblies.
SMBA
SMBA Cross Mounting Brackets for Profiles
SMBA cross mounting brackets connect profile-based EOAT frame members. Compare 13 catalog models by mounting dimensions, part number and the model-specific screw, shim and T-nut selection.
SMBB
SMBB Square-Profile Cross Joint Connectors
SMBB square-profile cross joint connectors provide a dimensioned inside-and-outside mounting arrangement for EOAT profiles. Six catalog models include exact part numbers and model-specific fastener references.
SMBC
SMBC Round-Tube to Profile Cross Joint Connectors
SMBC cross joint connectors combine a round through-bore with an outside profile mounting interface. Five catalog sizes cover the listed Ø10, Ø14, Ø20, Ø30 and Ø50 bore dimensions.
SMBD
SMBD Vertical Profile Fasteners
SMBD vertical profile fasteners provide a compact connection for the PEP2525 and PEP5025 profile arrangements shown in the catalog. Two models are listed with dimensions, part numbers and optional fastening components.
SMBD2
SMBD2 Profile Connecting Plates
SMBD2 profile connecting plates provide six catalog combinations of plate length and width for the listed PEP2525 and PEP5025 profile arrangements. The catalog explicitly excludes screw kits from these connecting plates.
SMBD3
SMBD3 Profile Angle Brackets
SMBD3 profile angle brackets are listed in four two-hole or four-hole configurations. Compare exact model codes, part numbers, labeled dimensions and the separate M5 or M6 fastening references.
SCF1 / SCF2 / SCF3 / SCF4 / SCF5
SCF1-5 EOAT Slide Brackets
SCF slide brackets provide five distinct mounting geometries for component positioning in EOAT assemblies. Compare 30 catalog model and part-number combinations using the drawing and dimensional table for each geometry.
SMBE
SMBE Flat Straight Mounting Connectors
SMBE flat straight connectors join a round component to a profile-based EOAT assembly. Seven catalog models provide different bore sizes, mounting dimensions and profile-specific accessory selections.
SMBE1
SMBE1 Slotted Mounting Brackets
SMBE1 slotted mounting brackets combine a round clamping bore with an extended mounting section for EOAT component positioning. Seven catalog variants include model-specific dimensions, weights and optional screw-kit references.
SMBE2
SMBE2 Heavy Duty Mounting Brackets
SMBE2 mounting brackets are the catalog Heavy Duty bracket family for round-component mounting in EOAT assemblies. Five models provide different bore diameters, bracket dimensions, weights and accessory selections.
SMBE3
SMBE3 Slotted Angular Mounting Brackets
SMBE3 slotted angular mounting brackets combine a round clamping bore with an adjustable mounting arrangement. Six catalog models provide different bore sizes, mounting spans, dimensions and optional fastener selections.
SMBE4
SMBE4 Round-Bore Mounting Brackets
SMBE4 round-bore mounting brackets secure round components to the profile arrangements listed in the catalog. Five models combine Ø14, Ø20 or Ø30 bores with model-specific mounting dimensions and fastener references.
SMBE5
SMBE5 Threaded Mounting Brackets
SMBE5 threaded mounting brackets combine a threaded component interface with a slotted mounting section. Twelve catalog models cover G1/8 and listed fine-pitch metric connections, with 40 or 60 mm mounting spans.
SMBE6
SMBE6 Slotted Plate Mounting Brackets
SMBE6 slotted plate mounting brackets are listed in fourteen model and PN combinations. Compare the long and short mounting geometries, round-hole dimensions, plate thicknesses and catalog weights for the required assembly.
SMBE7
SMBE7 Cylinder and Auxiliary Mounting Brackets
SMBE7 mounting brackets include two catalog drawing groups: three slotted cylinder-bracket models and four auxiliary profile-bracket models. Each group retains its own dimensions, part numbers and engineering applicability.
SMBE8
SMBE8 Ball-Joint Mounting Brackets
SMBE8 mounting brackets combine a ball-joint mounting interface with an extended slotted section. Three basic catalog models provide different bore sizes, dimensions, weights and optional accessory selections.
SMBG / SMBJ / SMBT5 / SMBT6
Sensor Brackets and Joint Components
Catalog-confirmed suction, sensor, chuck and joint brackets for EOAT mounting assemblies.
SMBK1
SMBK1 Clamp Mounting Brackets
SMBK1 clamp mounting brackets are listed in six basic models with bore, mounting-span and fastening dimensions. Review the exact model and catalog part number against the dimensional drawing before specifying the assembly.
SMBM
SMBM Gripper Installation Brackets
SMBM gripper installation brackets provide six catalog model options with distinct mounting-hole layouts and threaded connections. Compare exact model codes, part numbers, A-J dimensions and individual weights before specifying the gripper mounting interface.
SMBS
SMBS Slide Mounting Brackets
SMBS slide mounting brackets provide six catalog configurations for round-component mounting. Compare the bore, mounting span, M4 or M6 fastening reference, dimensions and catalog weight for each exact model.
SMBP
SMBP Parallel Connectors
SMBP parallel connectors join two round mounting members in the parallel arrangement shown in the catalog. Five basic models provide equal or different bore sizes, individual part numbers and model-specific dimensions.
SMBT / SMBF / SCD
Frame Joints and Supports
Catalog-confirmed swing blocks, cross connectors, T connectors and connection blocks for EOAT frames.
SMBT1
SMBT1 SSW Connectors
SMBT1 SSW connectors combine a catalog-listed M14 x 1 thread with a 12 mm round bore for a compact EOAT mounting connection. Review the exact model, part number, labeled dimensions and 16 g catalog weight.
GMP / GLU
Mould Positioners
GMP and GLU mould-positioning components for repeatable EOAT location and locking in automation applications.
SFP
SFP EOAT Fixing Plates
SFP fixing plates connect profile-based EOAT frames in straight, L-shaped, T-shaped, adjustable-angle and 45-degree arrangements. Compare 14 catalog models, exact part numbers, dimensions and model-specific mounting accessories.
Explore application selection guides
Review workpiece, contact and installation requirements before choosing mounting components. Use the product pages above for model-specific data.
Need help selecting a product?
Send the known model, application and quantity for review.