Product features
- Straight tube-to-thread connection
- Metric and inch tube-size tables
- Listed R, G, NPT and small-thread variants
EOAT & Factory Automation ComponentsSelection · Sourcing · RFQ Support
Pneumatics
SS-PC 304 Stainless Steel Male Straight Push-in Fittings
SS-PC 304 stainless steel male straight fittings connect pneumatic tube to threaded ports. Compare exact model codes and connection tables.
Series
SS-PC
Listed models
76
Range
304 stainless steel
Selection
72 confirmed; 4 awaiting confirmation
Model, PN and application context confirmed during inquiry.
Configuration confirmation: Some configuration details require confirmation before ordering. Review the engineering references and ask about the available options; unconfirmed selections remain restricted.
Overview
Understand the SS-PC product family
SS-PC 304 stainless steel male straight fittings connect pneumatic tube to threaded ports. Compare exact model codes and connection tables.
Selection approach
Match the exact tube outside diameter and thread standard shown in the table, then check the installation drawing. R, G, NPT, metric and 10-32 connections are distinct selections; keep any model on HOLD pending the stated confirmation.
All values shown below are traceable to the reviewed Catalog source. Missing information is not inferred.
Applications
Pneumatic tube connectionsAutomation air-line routingEquipment air-line maintenance
Product Selection Tool
Compare SS-PC Models
Match the exact tube outside diameter and thread standard shown in the table, then check the installation drawing. R, G, NPT, metric and 10-32 connections are distinct selections; keep any model on HOLD pending the stated confirmation.
| Model | PN | Model | Tube OD (D) | Thread (T) | Selection status | Status |
|---|---|---|---|---|---|---|
| SS-PC4-M5 | Confirm by material / quotation | - | 4 mm | M5 | - | Confirmed |
| SS-PC4-M6 | Confirm by material / quotation | - | 4 mm | M6 | - | Confirmed |
| SS-PC4-01 | Confirm by material / quotation | - | 4 mm | R1/8 | - | Confirmed |
| SS-PC4-02 | Confirm by material / quotation | - | 4 mm | R1/4 | - | Confirmed |
| SS-PC4-03 | Confirm by material / quotation | - | 4 mm | R3/8 | - | Confirmed |
| SS-PC6-M5 | Confirm by material / quotation | - | 6 mm | M5 | - | Confirmed |
| SS-PC6-M6 | Confirm by material / quotation | - | 6 mm | M6 | - | Confirmed |
| SS-PC6-01 | Confirm by material / quotation | - | 6 mm | R1/8 | - | Confirmed |
| SS-PC6-02 | Confirm by material / quotation | - | 6 mm | R1/4 | - | Confirmed |
| SS-PC6-03 | Confirm by material / quotation | - | 6 mm | R3/8 | - | Confirmed |
| SS-PC6-04 | Confirm by material / quotation | - | 6 mm | R1/2 | - | Confirmed |
| SS-PC6-06 | Confirm by material / quotation | - | 6 mm | R3/4 | - | Confirmed |
| SS-PC8-M5 | Confirm by material / quotation | - | 8 mm | M5 | - | Confirmed |
| SS-PC8-01 | Confirm by material / quotation | - | 8 mm | R1/8 | - | Confirmed |
| SS-PC8-02 | Confirm by material / quotation | - | 8 mm | R1/4 | - | Confirmed |
| SS-PC8-03 | Confirm by material / quotation | - | 8 mm | R3/8 | - | Confirmed |
| SS-PC8-04 | Confirm by material / quotation | - | 8 mm | R1/2 | - | Confirmed |
| SS-PC8-06 | Confirm by material / quotation | - | 8 mm | R3/4 | - | Confirmed |
| SS-PC10-01 | Confirm by material / quotation | - | 10 mm | R1/8 | - | Confirmed |
| SS-PC10-02 | Confirm by material / quotation | - | 10 mm | R1/4 | - | Confirmed |
| SS-PC10-03 | Confirm by material / quotation | - | 10 mm | R3/8 | - | Confirmed |
| SS-PC10-04 | Confirm by material / quotation | - | 10 mm | R1/2 | - | Confirmed |
| SS-PC10-06 | Confirm by material / quotation | - | 10 mm | R3/4 | - | Confirmed |
| SS-PC12-01 | Confirm by material / quotation | - | 12 mm | R1/8 | - | Confirmed |
| SS-PC12-02 | Confirm by material / quotation | - | 12 mm | R1/4 | - | Confirmed |
| SS-PC12-03 | Confirm by material / quotation | - | 12 mm | R3/8 | - | Confirmed |
| SS-PC12-04 | Confirm by material / quotation | - | 12 mm | R1/2 | - | Confirmed |
| SS-PC12-06 | Confirm by material / quotation | - | 12 mm | R3/4 | - | Confirmed |
| SS-PC14-02 | Confirm by material / quotation | - | 14 mm | R1/4 | - | Confirmed |
| SS-PC14-03 | Confirm by material / quotation | - | 14 mm | R3/8 | - | Confirmed |
| SS-PC14-04 | Confirm by material / quotation | - | 14 mm | R1/2 | - | Confirmed |
| SS-PC14-06 | Confirm by material / quotation | - | 14 mm | R3/4 | - | Confirmed |
| SS-PC16-02 | Confirm by material / quotation | - | 16 mm | R1/4 | - | Confirmed |
| SS-PC16-03 | Confirm by material / quotation | - | 16 mm | R3/8 | - | Confirmed |
| SS-PC16-04 | Confirm by material / quotation | - | 16 mm | R1/2 | - | Confirmed |
| SS-PC16-06 | Confirm by material / quotation | - | 16 mm | R3/4 | - | Confirmed |
| SS-PC16-1" | Confirm by material / quotation | - | - | - | HOLD - the printed model row has no thread, tube OD or dimensional cells; confirm the complete order specification. | HOLD |
| SS-PC4-G01 | Confirm by material / quotation | - | 4 mm | G1/8 | - | Confirmed |
| SS-PC4-G02 | Confirm by material / quotation | - | 4 mm | G1/4 | - | Confirmed |
| SS-PC6-G01 | Confirm by material / quotation | - | 6 mm | G1/8 | - | Confirmed |
| SS-PC6-G02 | Confirm by material / quotation | - | 6 mm | G1/4 | - | Confirmed |
| SS-PC6-G03 | Confirm by material / quotation | - | 6 mm | G3/8 | - | Confirmed |
| SS-PC6-G04 | Confirm by material / quotation | - | 6 mm | G1/2 | - | Confirmed |
| SS-PC8-G01 | Confirm by material / quotation | - | 8 mm | G1/8 | - | Confirmed |
| SS-PC8-G02 | Confirm by material / quotation | - | 8 mm | G1/4 | - | Confirmed |
| SS-PC8-G03 | Confirm by material / quotation | - | 8 mm | G3/8 | - | Confirmed |
| SS-PC8-G04 | Confirm by material / quotation | - | 8 mm | G1/2 | HOLD - the dimensional table prints L=45 and L1=25; confirm these installation dimensions before selection. | HOLD |
| SS-PC10-G01 | Confirm by material / quotation | - | 10 mm | G1/8 | - | Confirmed |
| SS-PC10-G02 | Confirm by material / quotation | - | 10 mm | G1/4 | - | Confirmed |
| SS-PC10-G03 | Confirm by material / quotation | - | 10 mm | G3/8 | - | Confirmed |
| SS-PC10-G04 | Confirm by material / quotation | - | 10 mm | G1/2 | - | Confirmed |
| SS-PC12-G02 | Confirm by material / quotation | - | 12 mm | G1/4 | - | Confirmed |
| SS-PC12-G03 | Confirm by material / quotation | - | 12 mm | G3/8 | - | Confirmed |
| SS-PC12-G04 | Confirm by material / quotation | - | 12 mm | G1/2 | - | Confirmed |
| SS-PC14-G02 | Confirm by material / quotation | - | 14 mm | G1/4 | - | Confirmed |
| SS-PC14-G03 | Confirm by material / quotation | - | 14 mm | G3/8 | - | Confirmed |
| SS-PC14-G04 | Confirm by material / quotation | - | 14 mm | G1/2 | - | Confirmed |
| SS-PC16-G02 | Confirm by material / quotation | - | 16 mm | G1/4 | - | Confirmed |
| SS-PC16-G03 | Confirm by material / quotation | - | 16 mm | G3/8 | - | Confirmed |
| SS-PC16-G04 | Confirm by material / quotation | - | 16 mm | G1/2 | - | Confirmed |
| SS-PC5/32-10-32 | Confirm by material / quotation | - | 5/32 in | 10-32 | - | Confirmed |
| SS-PC5/32-N1/8 | Confirm by material / quotation | - | 5/32 in | NPT1/8 | - | Confirmed |
| SS-PC5/32-N1/4 | Confirm by material / quotation | - | 5/32 in | NPT1/4 | - | Confirmed |
| SS-PC1/4-N1/8 | Confirm by material / quotation | - | 1/4 in | NPT1/8 | - | Confirmed |
| SS-PC1/4-N1/4 | Confirm by material / quotation | - | 1/4 in | NPT1/4 | - | Confirmed |
| SS-PC1/4-N3/8 | Confirm by material / quotation | - | 1/4 in | NPT3/8 | - | Confirmed |
| SS-PC1/4-N1/2 | Confirm by material / quotation | - | 1/4 in | NPT1/2 | - | Confirmed |
| SS-PC5/16-N1/8 | Confirm by material / quotation | - | 5/16 in | NPT1/8 / NPT1/4 (conflicting printed rows) | HOLD - the same exact model code is printed in two rows with T=NPT1/8 and T=NPT1/4; confirm the order code and thread. | HOLD |
| SS-PC5/16-N3/8 | Confirm by material / quotation | - | 5/16 in | NPT3/8 | - | Confirmed |
| SS-PC5/16-N1/2 | Confirm by material / quotation | - | 5/16 in | NPT1/2 | - | Confirmed |
| SS-PC3/8-N1/8 | Confirm by material / quotation | - | 3/8 in | NPT1/8 / NPT1/4 (conflicting printed rows) | HOLD - the same exact model code is printed in two rows with T=NPT1/8 and T=NPT1/4; confirm the order code and thread. | HOLD |
| SS-PC3/8-N3/8 | Confirm by material / quotation | - | 3/8 in | NPT3/8 | - | Confirmed |
| SS-PC3/8-N1/2 | Confirm by material / quotation | - | 3/8 in | NPT1/2 | - | Confirmed |
| SS-PC1/2-N1/4 | Confirm by material / quotation | - | 1/2 in | NPT1/4 | - | Confirmed |
| SS-PC1/2-N3/8 | Confirm by material / quotation | - | 1/2 in | NPT3/8 | - | Confirmed |
| SS-PC1/2-N1/2 | Confirm by material / quotation | - | 1/2 in | NPT1/2 | - | Confirmed |
Continue to Engineering Reference to verify drawings, dimensions and technical notes before quotation.
Engineering Reference
Technical Data & Dimensions
Review the engineering sheets for the selected model. Confirm dimensions, connections and the applicable configuration before quotation.
Dimensions & Drawings
Model / PN Reference
Technical Notes
Applicability
Authorized catalogue derivative, printed p70; R table and drawing: SS-PC — only the model codes shown in this reference
Authorized catalogue derivative, printed p70; G table and drawing: SS-PC — only the model codes shown in this reference
Authorized catalogue derivative, printed p70; N table and drawing: SS-PC — only the model codes shown in this reference
Technical specifications
| Configuration | Straight tube-to-male-thread connector |
|---|---|
| Supply material | 304 stainless steel; catalog model codes are retained. |
| Connection selection | Use the exact tube OD and thread or mounting size in the model guide. Check the corresponding engineering drawing. |
| Operating conditions | Include the medium, working pressure, temperature and tube material in your RFQ so the supplied 304 assembly can be matched to the application. |
SS-PC R dimensions and listed models
Model selection, connection sizes and dimensional reference · Authorized catalogue derivative, printed p70; R table and drawing
High-resolution web preview · Authorized catalogue derivative, printed p70; R table and drawing
SS-PC G dimensions and listed models
Model selection, connection sizes and dimensional reference · Authorized catalogue derivative, printed p70; G table and drawing
High-resolution web preview · Authorized catalogue derivative, printed p70; G table and drawing
SS-PC N dimensions and listed models
Model selection, connection sizes and dimensional reference · Authorized catalogue derivative, printed p70; N table and drawing
High-resolution web preview · Authorized catalogue derivative, printed p70; N table and drawing
Technical confirmation notes
- Match the exact tube outside diameter and thread standard shown in the table, then check the installation drawing. R, G, NPT, metric and 10-32 connections are distinct selections; keep any model on HOLD pending the stated confirmation.
- Use the exact catalog order code in your RFQ and specify the required quantity.
- HNQ supplies this series in 304 stainless steel. Material grade is part of the quotation specification.
- Models marked HOLD cannot be selected in the inquiry form; confirm their connection or installation details before ordering.
Product Inquiry
Ask about SS-PC
Choose a candidate model or leave the selection open. The RFQ context is generated from this product record and your current selection.
WhatsApp Inquiry
Discuss model, price and lead time
Request the EOAT Catalog
Receive an appropriate verified catalog