Product features
- Three push-in tube ports
- Two equal D1 run ports and one smaller D2 branch
- Metric and inch diameter-pair tables
EOAT & Factory Automation ComponentsSelection · Sourcing · RFQ Support
Pneumatics
APEG Reducing Union Tee Push-in Fittings
APEG reducing tee unions join different pneumatic tube sizes. Use the model-specific D1 and D2 pair and drawing for selection.
Series
APEG
Listed models
15
Range
Plastic push-in fittings
Selection
Tube size and connection
Model, PN and application context confirmed during inquiry.
Overview
Understand the APEG product family
APEG reducing tee unions join different pneumatic tube sizes. Use the model-specific D1 and D2 pair and drawing for selection.
Selection approach
Match each labelled tube OD to its port position in the drawing. Select only a listed diameter pair; no pipe-thread connection is shown.
All values shown below are traceable to the reviewed Catalog source. Missing information is not inferred.
Applications
Pneumatic tube systemsAir-line routingVacuum-line connections
Product Selection Tool
Compare APEG Models
Match each labelled tube OD to its port position in the drawing. Select only a listed diameter pair; no pipe-thread connection is shown.
| Model | PN | Run tube OD (D1) | Branch tube OD (D2) | Status |
|---|---|---|---|---|
| APEG06-04 | Confirm by material / quotation | 6 mm | 4 mm | Confirmed |
| APEG08-04 | Confirm by material / quotation | 8 mm | 4 mm | Confirmed |
| APEG08-06 | Confirm by material / quotation | 8 mm | 6 mm | Confirmed |
| APEG10-06 | Confirm by material / quotation | 10 mm | 6 mm | Confirmed |
| APEG10-08 | Confirm by material / quotation | 10 mm | 8 mm | Confirmed |
| APEG12-10 | Confirm by material / quotation | 12 mm | 10 mm | Confirmed |
| APEG14-12 | Confirm by material / quotation | 14 mm | 12 mm | Confirmed |
| APEG16-12 | Confirm by material / quotation | 16 mm | 12 mm | Confirmed |
| APEG16-14 | Confirm by material / quotation | 16 mm | 14 mm | Confirmed |
| APEG1/4-5/32 | Confirm by material / quotation | 1/4 in | 5/32 in | Confirmed |
| APEG5/16-5/32 | Confirm by material / quotation | 5/16 in | 5/32 in | Confirmed |
| APEG5/16-1/4 | Confirm by material / quotation | 5/16 in | 1/4 in | Confirmed |
| APEG3/8-1/4 | Confirm by material / quotation | 3/8 in | 1/4 in | Confirmed |
| APEG3/8-5/16 | Confirm by material / quotation | 3/8 in | 5/16 in | Confirmed |
| APEG1/2-3/8 | Confirm by material / quotation | 1/2 in | 3/8 in | Confirmed |
Continue to Engineering Reference to verify drawings, dimensions and technical notes before quotation.
Engineering Reference
Technical Data & Dimensions
Review the engineering sheets for the selected model. Confirm dimensions, connections and the applicable configuration before quotation.
Dimensions & Drawings
Model / PN Reference
Technical Notes
Applicability
Catalogue printed page 18: APEG — only the model codes shown in this reference
Catalogue printed page 01: APEG — only the model codes shown in this reference
Technical specifications
| Configuration | Reducing tee with two D1 push-in run ports and a smaller D2 push-in branch port. |
|---|---|
| Fluid | Air, vacuum |
| Operating pressure | 0-1.0 MPa (150 psi) |
| Negative pressure | -100 kPa (-29.5 inHg) |
| Max pressure | 1.5 MPa; catalogue does not label this as burst pressure. |
| Operating temperature | 0-60°C (32-140°F) |
| Applicable tube | Polyurethane and nylon |
APEG engineering drawing and listed model table
Model selection, connection sizes and dimensional reference · Catalogue printed page 18
High-resolution web preview · Catalogue printed page 18
Plastic push-in fittings family features, specifications, materials and order guide
Model selection, connection sizes and dimensional reference · Catalogue printed page 01
High-resolution web preview · Catalogue printed page 01
Technical confirmation notes
- Match each labelled tube OD to its port position in the drawing. Select only a listed diameter pair; no pipe-thread connection is shown.
- Use the exact catalog order code in your RFQ and specify the required quantity.
Product Inquiry
Ask about APEG
Choose a candidate model or leave the selection open. The RFQ context is generated from this product record and your current selection.
WhatsApp Inquiry
Discuss model, price and lead time
Request the EOAT Catalog
Receive an appropriate verified catalog